| Trussing, Stands, Lifts and Support Call (818) 557 0903 Fax (866) 836 5725 Visa/MC Amex |
 |
 |
 |
|
|
Misc Ladders
12" ladder 5ft
Package of 3 pieces
$165
|
Truss Circles
These are new Suplus stock!!!
10' OD 12" Med duty circle $2995
1 pcs avail
12' OD 12" Med duty circle $3450
1 only
20' OD 12" med duty circle $4995
2 pcs avail
20' OD 20.5" circle $4900
2 pcs avail
|
|
 |
 |
 |
 |
12x12 10ft Tower Truss (spigoted) - $349 - These are super HD - would make a great 60ft hanging truss
Buy all 6 pieces - $1995
(these pieces dealer out at about $600 a piece!!!)
|
12" x 2.5ft - $245
|
12x12 Corners (3-way) - $275 12x12 Corners (6-way) - $399 12x12 Corners (4-way)- $295 12x12 Corner (3 way w/bottom) $250 12x12 Corner (2 way w/bottom, right hand) - $250 12x12 Corner (2 way w/bottom, left hand) - $250 |
12" x 5ft - $375
Package 12 pieces - $3995
|
 |
 |
 |
 |
|
20.5x20.5 8Ft - $450
Package 11 pieces $4500
|
12x18 5ft - $365 12x18 - 10ft - $525 12x18 4 way corner - $250 12x18 - 8ft - $425 Package - 8x5s, 10x8s, 4x10s, 8 corners - $9995 |
|
|
 |
 |
 |
|
Truss Just In!!!
|
High End HQ Fog fluid
Ask for pallet pricing
$59.95 per 2.5 gallon
|
20.5" x 10ft spigoted - $445
Package 3 pieces - (this is super HD stuff) - $1200
|
 |
|
|
|
|
Custom 20.5" corners - and spacers - we have some 3 way ($195), some 2 way corners ($175) and a couple of spacers -
|
|
|
 |
 |
 |
 |
| Heavy duty drape base - has thumb screw tightening for center - 17" round. $40 each | Small heavy duty 8" square bases with offset hole for stanchions. 38 pcs available - $12 each | 36" convention uprights - 60 pcs available - in custom case if you take all ....$12 each | T piece fits on up right poles - $5 each |
|
|
 |
|
|
|
Eventer 25' Lift - exaclty the same as a Genie ST25 except wider mast Shipping cost is $195 ea ground - New Units $2795 each! | |
|
|
 |
Rolling scaffolds - stand by for inventory and pricing! Blue Scaffold On Casters 2 levels with safety rails and outriggers - $695 Great for installations! |
 |
4x10ft walk boards 2x7ft walk boards 8xhandrails 2x long cross braces 2x medium crossbraces 6x6ft 27" upright frames 8x4ft 27" upright frames 4 outriggers All the aluminum stuff - $1700 We doubled these up and used them for projection and followspot platforms - nice stuff. |
 |
|
 |
 |
 |
 |
| Corner blocks SOLD OUT | |
|
|
|
|
|
|
|
 |
 |
|
|
12"x12" x 10ft
Medium duty truss - again this is brand new overstocked gear - we have 25 pcs available - $435 each - 10 pcs for $4k - hurry!
|
Custom 20.5" corners - and spacers - we have some 3 way ($195), some 2 way corners ($175) and a couple of spacers -
|
 |
 |
|
|
Truss Grid
Out of our showroom - this stuff has never been moved in 8 years! It's the High End Alumilite - triangular looks to be 14" approx.
5x10ft
2 T sections
2x5ft
4x corners
$1150
|
20" Box Truss Corners
6 way - $550
|
|
|
 |
 |
|
 |
Oddball piece of 20" with wheels - looks to be about 6ft - $250
|
Trilite truss - 3 pieces (2m) and 1 piece (1m) with spigots
$595 the lot
|
Oddball #2
Black painted 20" box truss - 5 ft
$175
|